|
|
Guys, can i add an additional question to this solution…?
I have a page visible to non registered customers and is part of the menu here:
http://networkmarketingsystem.mikelowndes.com/membership-options-page/
I would like to hide this page from members who are logged in at any level from 1-3 (Paying customers) as these will get the option to buy the upgrade if available. As the the Membership options page should only be available to those who NEED to buy in to the site.
Can i Hide this page from none member and level 0 members?
Thanks in advance
Mike
|
|
|
Cassel – you are a star! – thank you, thank you, thank you :-)
|
|
|
Your welcome…
The problem was….I created the rDNS through the PLESK control panel for our VPS which ‘seemed’ to be the right thing to do on the advice of the ISP. But after 4 hours of head crunching and a polite phone call back them, they found that it had to be done BY them. This was put in place on Friday – I left the system to work it’s propagating magic over the weekend (12 hour rule) and on the Monday i was a happy chappie.
Now, if i can get Aweber to STOP sending the double optin email for the user to confirm their registration (Too mnay emails going out) I’ll have this fixed.
thanks again for your help guys
-
This reply was modified 4 years, 2 months ago by
 Mike Lowndes.
|
|
|
Well after allot of back and forth between Aweber and the hosting Co. Ive finally fixed the Aweber intergration…
That pesky rDNS all over again.
Thanks to all your help guys it appreciated and i have to say – this s2Mebersoftware is amazing
|
|
|
Really helpful response from Aweber…
“Alright, on our end things do look fine. Unfortunately, there is not much support we can provide into this issue as we do not provide support for custom parsers. Your better option would be to contact S2Member for help with the parser to assure that the information is both being sent correctly and for further instructions to ensure that the right keys are in the parser.”
Still in the dark here – ive used new email address to get over the 12 hour rule – checked the rDNS – Not sure what else to do
|
|
|
Thanks Mate – I’ll keep you postsed
|
|
|
Thanks for clearing that up Jason – asterisks are in place.
Aweber still not taking the users email in though :-(
|
|
|
Checked the rDNS and it’s point to the domain name – The test site is in a sub domain – would this cause a problem?
|
|
|
Ive tested forwarding it to Aweber and its bouncing back with this as part of the message
:
207.106.200.39 does not like recipient.
Remote host said: 550 server109-228-26-22.live-servers.net is either part of a dynamic IP range or we have received spam from this domain. Please see http://www.aweber.com/email-blocked.htm?reason=rdns_id-1002&ip=109.228.26.22
Giving up on 207.106.200.39.
|
|
|
I just noticed in the code sample at http://www.s2member.com/kb/aweber-email-parser-for-s2member/
You have left out the * in the Rules – I this intentional?
Description: s2Member Email Parser
Trigger Rule: s2Member Subscription Request\n (match on: Body)
Rule 1: \nEMail Address: (.+?)\n (match on: Body, store in: Email)
Rule 2: \nFull Name: (.+?)\n (match on: Body, store in: Name)
Rule 3: \nAd Tracking: (.+?)\n (match on: Body, store in: Ad Tracking)
Rule 4: \nRole: (.+?)\n (match on: Body, store in: Misc)
|
|
|
Hi Christian,
Yes ive got them turned on
Also used the BCC to email back …
s2Member Subscription Request
s2Member w/ PayPal Email ID
Ad Tracking: s2Member-networkmarketingsystem.mikelowndes.com
EMail Address: lowndes.mike@gmail.com
Buyer: Jack Spratt
Full Name: Jack Spratt
First Name: Jack
Last Name: Spratt
IP Address: 86.138.194.148
User ID: 12
Login: BigTest
Role: subscriber
Level: 0
CCaps:
– end.
Still no luck
|
|
|
And the reverse PTR record is in place – so I’m a bit puzzled – any suggestions
|
|
|
Hi Eduan,
Yes , i’ve added the LISTNAME and created the email parser in Aweber, which has tested OK – Signed up as a new registered user which works in s2M but nothing is going to Aweber.
I’ve read lots of thread on here and I seem to doing the right thing – Confused at to why it’s not writing to AWeber.
|
|
|
Christian – Thank you – that worked perfectly and all is ready for the new theme… :-)
|
|
|
Thanks Christian – that’s fixed it nicely – ive just got to figure out how the format it the same as the other menu items now. If you have any suggestions feel free.
here’s the shell site http://networkmarketingsystem.mikelowndes.com
|
|
|
Hi Eduan,
I added this to a page for users to log in
<?php echo s2member_pro_login_widget(); ?>
I was expecting to see the login form but didn’t – did i miss something?
Mike
|
|
|
Sorry – it was a case of Using the menu options in Appearances and checking the page level access restrictions – once each page was associated as a menu page and i had set the user level for that page in the page properties it worked fine – was a simple mistake.
Mike
|
|
|
You’re a start thank you.
Just one question – I’m no programmer – more of a cut and shunt coder – How would i use this code?
Thanks for all your help
Mike
|
|
|
Good thinking Christian, I’ll give it a try and let you know
|
|
|
Hi Eduan,
Ive tried the the code and placed this in the html of a page:
Installed the PHP Execution plug in and activated it but it’s not giving me the log in fields on the page.
any advise?
|
|
|
Hi Eduan,
I was just being blind to the fact of using menus with access levels – All sorted and thanks for the reply
Mike
|
Pre-Sale FAQs
Video Tutorials
Community Forum
Knowledge Base
News/Updates
s2 Codex / Docs
GPL v2 License
Contact A Human
About Us
Our Customers
Support Policy
Privacy Policy
Old Forums (READ-ONLY): The 
